LPIC3 DIPLOMA Linux Clustering – LAB NOTES: Lesson Ceph Centos7 – Ceph RDB Block Devices

LAB on Ceph Clustering on Centos7

 

These are my notes made during my lab practical as part of my LPIC3 Diploma course in Linux Clustering. They are in “rough format”, presented as they were written.

 

This lab uses the ceph-deploy tool to set up the ceph cluster.  However, note that ceph-deploy is now an outdated Ceph tool and is no longer being maintained by the Ceph project. It is also not available for Centos8. The notes below relate to Centos7.

 

For OS versions of Centos higher than 7 the Ceph project advise you to use the cephadm tool for installing ceph on cluster nodes. 

 

At the time of writing (2021) knowledge of ceph-deploy is a stipulated syllabus requirement of the LPIC3-306 Clustering Diploma Exam, hence this Centos7 Ceph lab refers to ceph-deploy.

 

 

As Ceph is a large and complex subject, these notes have been split into several different pages.

 

 

Overview of Cluster Environment 

 

 

The cluster comprises three nodes installed with Centos7 and housed on a KVM virtual machine system on a Linux Ubuntu host. We are installing with Centos7 rather than the recent version because the later versions are not compatible with the ceph-deploy tool.

 

 

Ceph RDB Block Devices

 

 

You must create a pool first before you can specify it as a source.

 

[root@ceph-mon ~]# ceph osd pool create rbdpool 128 128
Error ERANGE: pg_num 128 size 2 would mean 768 total pgs, which exceeds max 750 (mon_max_pg_per_osd 250 * num_in_osds 3)
[root@ceph-mon ~]# ceph osd pool create rbdpool 64 64
pool ‘rbdpool’ created
[root@ceph-mon ~]# ceph osd lspools
4 cephfs_data
5 cephfs_metadata
6 rbdpool
[root@ceph-mon ~]# rbd -p rbdpool create rbimage –size 5120
[root@ceph-mon ~]# rbd ls rbdpool
rbimage
[root@ceph-mon ~]# rbd feature disable rbdpool/rbdimage object-map fast-diff deep-flatten
rbd: error opening image rbdimage: (2) No such file or directory
[root@ceph-mon ~]#

[root@ceph-mon ~]#
[root@ceph-mon ~]#
[root@ceph-mon ~]# rbd feature disable rbdpool/rbimage object-map fast-diff deep-flatten
[root@ceph-mon ~]# rbd map rbdpool/rbimage –id admin
/dev/rbd0
[root@ceph-mon ~]# lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sr0 11:0 1 1024M 0 rom
vda 252:0 0 10G 0 disk
├─vda1 252:1 0 1G 0 part /boot
└─vda2 252:2 0 9G 0 part
├─centos-root 253:0 0 8G 0 lvm /
└─centos-swap 253:1 0 1G 0 lvm [SWAP]
rbd0 251:0 0 5G 0 disk
[root@ceph-mon ~]#

[root@ceph-mon ~]# rbd showmapped
id pool image snap device
0 rbdpool rbimage – /dev/rbd0
[root@ceph-mon ~]# rbd –image rbimage -p rbdpool info
rbd image ‘rbimage’:
size 5 GiB in 1280 objects
order 22 (4 MiB objects)
id: d3956b8b4567
block_name_prefix: rbd_data.d3956b8b4567
format: 2
features: layering, exclusive-lock
op_features:
flags:
create_timestamp: Wed May 5 15:32:48 2021
[root@ceph-mon ~]#

 

 

 

to remove an image:

 

rbd rm {pool-name}/{image-name}

[root@ceph-mon ~]# rbd rm rbdpool/rbimage
Removing image: 100% complete…done.
[root@ceph-mon ~]# rbd rm rbdpool/image
Removing image: 100% complete…done.
[root@ceph-mon ~]#
[root@ceph-mon ~]# rbd ls rbdpool
[root@ceph-mon ~]#

 

 

To create an image

 

rbd create –size {megabytes} {pool-name}/{image-name}

 

[root@ceph-mon ~]#
[root@ceph-mon ~]# rbd create –size 2048 rbdpool/rbdimage
[root@ceph-mon ~]# rbd ls rbdpool
rbdimage
[root@ceph-mon ~]#
[root@ceph-mon ~]# rbd ls rbdpool
rbdimage
[root@ceph-mon ~]#

[root@ceph-mon ~]# rbd feature disable rbdpool/rbdimage object-map fast-diff deep-flatten
[root@ceph-mon ~]# rbd map rbdpool/rbdimage –id admin
/dev/rbd0
[root@ceph-mon ~]# lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sr0 11:0 1 1024M 0 rom
vda 252:0 0 10G 0 disk
├─vda1 252:1 0 1G 0 part /boot
└─vda2 252:2 0 9G 0 part
├─centos-root 253:0 0 8G 0 lvm /
└─centos-swap 253:1 0 1G 0 lvm [SWAP]
rbd0 251:0 0 2G 0 disk
[root@ceph-mon ~]# rbd showmapped
id pool image snap device
0 rbdpool rbdimage – /dev/rbd0
[root@ceph-mon ~]#

[root@ceph-mon ~]#
[root@ceph-mon ~]# rbd –image rbdimage -p rbdpool info
rbd image ‘rbdimage’:
size 2 GiB in 512 objects
order 22 (4 MiB objects)
id: fab06b8b4567
block_name_prefix: rbd_data.fab06b8b4567
format: 2
features: layering, exclusive-lock
op_features:
flags:
create_timestamp: Wed May 5 16:24:08 2021
[root@ceph-mon ~]#
[root@ceph-mon ~]#
[root@ceph-mon ~]# rbd –image rbdimage -p rbdpool info
rbd image ‘rbdimage’:
size 2 GiB in 512 objects
order 22 (4 MiB objects)
id: fab06b8b4567
block_name_prefix: rbd_data.fab06b8b4567
format: 2
features: layering, exclusive-lock
op_features:
flags:
create_timestamp: Wed May 5 16:24:08 2021
[root@ceph-mon ~]# rbd showmapped
id pool image snap device
0 rbdpool rbdimage – /dev/rbd0
[root@ceph-mon ~]# mkfs.xfs /dev/rbd0
Discarding blocks…Done.
meta-data=/dev/rbd0 isize=512 agcount=8, agsize=65536 blks
= sectsz=512 attr=2, projid32bit=1
= crc=1 finobt=0, sparse=0
data = bsize=4096 blocks=524288, imaxpct=25
= sunit=1024 swidth=1024 blks
naming =version 2 bsize=4096 ascii-ci=0 ftype=1
log =internal log bsize=4096 blocks=2560, version=2
= sectsz=512 sunit=8 blks, lazy-count=1
realtime =none extsz=4096 blocks=0, rtextents=0
[root@ceph-mon ~]#

 

[root@ceph-mon mnt]# mkdir /mnt/rbd
[root@ceph-mon mnt]# mount /dev/rbd0 /mnt/rbd
[root@ceph-mon mnt]# df
Filesystem 1K-blocks Used Available Use% Mounted on
devtmpfs 753596 0 753596 0% /dev
tmpfs 765380 0 765380 0% /dev/shm
tmpfs 765380 8844 756536 2% /run
tmpfs 765380 0 765380 0% /sys/fs/cgroup
/dev/mapper/centos-root 8374272 2441472 5932800 30% /
/dev/vda1 1038336 175296 863040 17% /boot
tmpfs 153076 0 153076 0% /run/user/0
/dev/rbd0 2086912 33184 2053728 2% /mnt/rbd
[root@ceph-mon mnt]#

 

 

 

How to resize an rbd image

eg to 10GB.

rbd resize –size 10000 mypool/myimage

Resizing image: 100% complete…done.

Grow the file system to fill up the new size of the device.

xfs_growfs /mnt
[…]
data blocks changed from 2097152 to 2560000

 

Creating rbd snapshots

An RBD snapshot is a snapshot of a RADOS Block Device image. An rbd snapshot creates a history of the image’s state.

It is important to stop input and output operations and flush all pending writes before creating a snapshot of an rbd image.

If the image contains a file system, the file system must be in a consistent state before creating the snapshot.

rbd –pool pool-name snap create –snap snap-name image-name

rbd snap create pool-name/image-name@snap-name

eg

rbd –pool rbd snap create –snap snapshot1 image1
rbd snap create rbd/image1@snapshot1

 

To list snapshots of an image, specify the pool name and the image name.

rbd –pool pool-name snap ls image-name
rbd snap ls pool-name/image-name

eg

rbd –pool rbd snap ls image1
rbd snap ls rbd/image1

 

How to rollback to a snapshot

To rollback to a snapshot with rbd, specify the snap rollback option, the pool name, the image name, and the snapshot name.

rbd –pool pool-name snap rollback –snap snap-name image-name
rbd snap rollback pool-name/image-name@snap-name

eg

rbd –pool pool1 snap rollback –snap snapshot1 image1
rbd snap rollback pool1/image1@snapshot1

IMPORTANT NOTE:

Note that it is faster to clone from a snapshot than to rollback an image to a snapshot. This is actually the preferred method of returning to a pre-existing state rather than rolling back a snapshot.

 

To delete a snapshot

To delete a snapshot with rbd, specify the snap rm option, the pool name, the image name, and the user name.

rbd –pool pool-name snap rm –snap snap-name image-name
rbd snap rm pool-name/image-name@snap-name

eg

rbd –pool pool1 snap rm –snap snapshot1 image1
rbd snap rm pool1/image1@snapshot1

Note also that Ceph OSDs delete data asynchronously, so deleting a snapshot will not free the disk space straight away.

To delete or purge all snapshots

To delete all snapshots for an image with rbd, specify the snap purge option and the image name.

rbd –pool pool-name snap purge image-name
rbd snap purge pool-name/image-name

eg

rbd –pool pool1 snap purge image1
rbd snap purge pool1/image1

 

Important when cloning!

Note that clones access the parent snapshots. This means all clones will break if a user deletes the parent snapshot. To prevent this happening, you must protect the snapshot before you can clone it.

 

do this by:

 

rbd –pool pool-name snap protect –image image-name –snap snapshot-name
rbd snap protect pool-name/image-name@snapshot-name

 

eg

 

rbd –pool pool1 snap protect –image image1 –snap snapshot1
rbd snap protect pool1/image1@snapshot1

 

Note that you cannot delete a protected snapshot.

How to clone a snapshot

To clone a snapshot, you must specify the parent pool, image, snapshot, the child pool, and the image name.

 

You must also protect the snapshot before you can clone it.

 

rbd clone –pool pool-name –image parent-image –snap snap-name –dest-pool pool-name –dest child-image

rbd clone pool-name/parent-image@snap-name pool-name/child-image-name

eg

 

rbd clone pool1/image1@snapshot1 pool1/image2

 

 

To delete a snapshot, you must unprotect it first.

 

However, you cannot delete snapshots that have references from clones unless you first “flatten” each clone of a snapshot.

 

rbd –pool pool-name snap unprotect –image image-name –snap snapshot-name
rbd snap unprotect pool-name/image-name@snapshot-name

 

eg

rbd –pool pool1 snap unprotect –image image1 –snap snapshot1
rbd snap unprotect pool1/image1@snapshot1

 

 

To list the children of a snapshot

 

rbd –pool pool-name children –image image-name –snap snap-name

 

eg

 

rbd –pool pool1 children –image image1 –snap snapshot1
rbd children pool1/image1@snapshot1